Forums » General

List of newest posts

    • August 28, 2018 8:49 AM CEST
    • Rick Crammond said:

      The nano-coated zinc and zinc plates can be used together to make only the zinc gans. The zinc plate may have a dusty white coating when nano-coated. Use a light application of caustic for a shorter amount odf time than with the copper. See KF wikipedia for more details: https://wiki.keshefoundation.org/index.php/KFSSI_WIKI#ZnO_GANS

       

      hi Rick, the link you provided is not active ?

      would you let me know the details of how to nano coat zinc plate ? i found no detail information regarding the zinc nano coating.

      do we have to let the zinc plate immersed under the solution like we do with copper plates ?

      thank you

       

    • July 18, 2018 1:43 PM CEST
    • https://en.kfwiki.org/wiki/KFSSI_WIKI#ZnO_GANS

    • May 22, 2018 4:39 PM CEST
    • This is a picture of the Nano Coated Zinc Plate.

    • December 19, 2017 2:55 AM CET
    • The nano-coated zinc and zinc plates can be used together to make only the zinc gans. The zinc plate may have a dusty white coating when nano-coated. Use a light application of caustic for a shorter amount odf time than with the copper. See KF wikipedia for more details: https://wiki.keshefoundation.org/index.php/KFSSI_WIKI#ZnO_GANS

       

    • December 15, 2017 4:42 PM CET
    • Hi,

       

      Can I use nano-coated zinc for the plates in gans production? I find copper plates hard to find and expensive and zinc is cheap and I have lots.

       

      If so, what should the NC Zinc look like when it is NCed?

    • July 18, 2018 8:35 PM CEST
    • There is a problem in the beautiful Görtschitztal in Carinthia. The whole drama can be read here. A report of the Federal Environment Agency is available here.

      In principle, we are dealing with a large-scale poisoning of the environment and all the resulting disadvantages.

       

      How toxic is HCB? *

      HCB is among the twelve most dangerous industrial chemicals ever. It can u.a. cause cancer, but also affect the liver and hormone system. It is also particularly dangerous because it is persistent (persistent, hardly biodegradable) and can accumulate in organisms. A longer lasting intake of small amounts can be more problematic than a one-time high intake.

       

      What about the degradability of HCB in the environment and in the body? *

      HCB is hardly degradable. In the soil, science assumes a half-life of about 20 years, which means that in 20 years half of it is mined.

      Also in the body HCB is bad, but probably better than in the soil, degradable. In any case, it is crucial for a decrease that no new admission takes place. In any case, it can be assumed that a reduction takes many years.

      It can be assumed that the half-life in the body depends on the concentration. That is, at high concentrations, degradation occurs slightly faster than at lower concentrations. Unfortunately, there is a lack of scientific research to provide more reliable information. An effective “detoxification method” is unknown.

      * Source: Greenpeace

       

      To make it short.

      We sampled from a river that flows through the contaminated area and mixed it with different types of GaNS. Since this GaNS is a very special liquid, we had expected a change in the samples and were not disappointed.

      In total, we had 10 samples examined by a research laboratory and provided the results report as file attachment.

      In 3 out of 10 samples no HCB contamination is detectable. :)

    • July 12, 2018 7:58 AM CEST
    • Let's not miss the teachings of the past.
      Triquetra teaching says that Unitary Space Continuum exists.
      We shall need the help of the Past and the Future aswell, to change this moment.

      The ones that would like to become DATAMINERS, should try to find the hyddend books, the missing ones, the secret ones and the classified ones. This action, to restore the continuity of knowledge, shall be undertaken by the ones that love archeology, history and science.


      The ones that would like to become EYEMINERS, should try to find hydden pictures, photographs, secret and classified ones, by searching through every record, library and biblioteque. This action, to restore the continuity of Knowledge, shall be undertaken by the ones that love art, photography, design and visual mnemonic gifts. Savants are welcomed.


      The ones that would like to become BRAINSTORMERS, should try to meditate, concentrate, visualize and receive the emissions of present, past  and future minds, by entering the Akashic dimension to gather useful informations. This action, to restore the continuity of knowledge, shall be undertaken by the ones that have been gifted with Siddhis,telepathy, precognition, insight and increased subtle perceptions.

       

      The ones that would like to become LINKSHAA REBUILDERS, should try to unite, gather and link every possible useful element, study, research and researcher, information, detail, web site, novel, book, comic, movie or any other creative work that has not been connected to the matrix, in this specific way, and allow it to partecipate. This action, to restore the the continuity of knowledge, shall be undertaken by the ones that developed during their lifetime an intuitive mind and vision, creativity, as artists, engineers, researchers and scientists.

       

      DATAMINERS, EYEMINERS, BRAINSTORMERS AND LINKSHAA REBUILDERS, will be the first Human Star Formation interlinked to reach a higher level of conscience.  In so many ways, they shall be transtemporal, and through unity, they will reach the wisdom of the mind and the compassion of the heart. I call this path Jediway.  Jedi Yoga, this science. The fourth Force, is the Etheric one. Interact accordingly to the changes of frequency. In the faith of love act truly.

      Jedi Simon

       

       

    • April 6, 2018 5:32 AM CEST
    • I have seen a bunch of vids on making GANS and they all are a bit different.

      Where can I find the best instructions for;

      1. Nanocoating and

      2. Gans making

    • May 30, 2018 3:56 AM CEST
    • Dear Mr. Keshe, I have the highest consideration and respect for your work and your interest in bringing instruction.

      But with regard to the Gans how should we understand it, you have said to have solid state CO2, is this CO2 a result of CO2 GANS?

      How should we understand this measurement in relation to CO2 GANS ?

      https://keshefacts.wordpress.com/gans/

      In CO2 GANS, should it have CO2 particles, or is the form of the test wrong for that particular case ?

      I put myself as a student who intends to know the truth and this truth set me free.

      If this is not an offense to you, I want to know your important opinion.

       

      Thank's 

    • May 21, 2018 6:00 PM CEST
    • We created amazing tool for your health and healing, you can wear them 24/7. Inside those Ropes are a mix of several Gans plus some vitamins and minerals.

      We have them as WaistLets, NeckLets, AnkLets and WristLets, and Wraplets (for water Cup or bottles).

      If you are interested in our Full Body Armor (or in sigle Units), please contact me at begreattransformation@gmail.com

    • March 3, 2018 10:36 PM CET
    • Hello!
      Let me simply ask why the "pain pain" is not larger (why so small)?
      I am a spinal cord injured person for seven years now after a gymnastic accident. And beside using the pain pen on myself I also lend it to my four assistants that I´m depending on... And no matter what pain we have it works so damn GOOD!

      Again, may I ask why "Keshfoundation" are not producing a bigger pain pen with (probably) higher output power from the magnetic field? I have already bought 7 more (it´s a little expensive I know) but what if you stick them together with tape and have all this energy pointed at one way/direction? In my case, towards the neck injury.

      I would be more than thankful if I could have some feedback and hopefully a further discussion on my strategies on how to develop the plasma energy.

      kind regards
      Artur Estam

    • January 30, 2018 2:29 PM CET
    • Hey Alan, it is just a pvc ball valve found at most hardware stores.  I'm not certain of the size if it is a 1" or 3/4" ball valve.  Hope that helps. Dr Keith

    • December 22, 2017 3:15 PM CET
    • Like this?

    • December 19, 2017 3:24 AM CET
    • Looks like I have answered my own question. I got it from a local irrigation company.

    • December 15, 2017 4:13 PM CET
    • I have a few thoughts but was wondering where I could find such a valve?

    • December 19, 2017 7:41 AM CET
    • I was wondering if it would be useful to use a magnetic stirrer when making GANS?

       

      I was thinking that keeping the solution moving would encourage the process, however I wonder about how the magnetic field would affect it ?

    • December 19, 2017 2:58 AM CET
    • Maintaining warmth is more important for making of the nano-coating than for the Gans. Body temperature is a good range.

    • December 15, 2017 4:11 PM CET
    • Hello everyone,

       

      I am about to make gans and was wondering if doing it in a slow cooker (crock pot) would speed up the process?